Vacon 100 Flow IP54 11kW 400V 3ph - Fan/Pump AC Inverter Drive Speed Controller VACON0100-3L-0023-5-FLOW+IP54 11Kw/23Amp 3 Phase Input / 3 Phase Output IP54
£829.17GBP
inc VAT
Technical overview
About these figures
These figures provide simplified information for searching, filtering and initial comparison. They are not a complete specification. Exact details depend on the model and configuration.
Power rating: Usually the motor’s rated mechanical output (P2). Electrical input power (P1) is a different value. Check the product’s nameplate or manufacturer’s documentation to confirm which rating applies.
Outlet size: The nominal size class is expressed on a millimetre basis: for example, DN40 denotes a nominal 40 mm size. It does not specify the exact measured opening, connection type, thread, flange drilling or pressure rating.
Head and flow: Indicative figures describing the pump’s performance envelope, rather than a single operating duty point. Do not assume maximum flow is available at maximum head, or that every combination within the ranges is achievable. Minimum figures do not establish safe continuous operating limits. Consult the relevant performance curve.
Check the product description, nameplate and manufacturer’s documentation before selection or installation. Please contact us before purchasing if you need help confirming suitability or connection details.
| Shipping Weight | 10.0 kg |
6 Month guarantee on all of our used pumps
Please call us for free advice on replacement
We also take card payment over the phone
We buy and sell new and unused pumps
Can deliver for next day if ordered before 4pm
Same day delivery possible please call for a quote
MAJORITY OF OUR PUMPS ARE NEW, UNUSED, NEVER BEEN FITTED SURPLUS STOCK
Please call us for free advice on replacement
We also take card payment over the phone
We buy and sell new and unused pumps
Can deliver for next day if ordered before 4pm
Same day delivery possible please call for a quote
MAJORITY OF OUR PUMPS ARE NEW, UNUSED, NEVER BEEN FITTED SURPLUS STOCK
WORLDWIDE DELIVERY AVAILABLE
Internationally for free we ship to:
Aland Islands, Armenia, Austria, Belarus, Belgium, Bosnia And Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Faroe Islands, Finland, France, Georgia, Germany, Greece, Guernsey, Hungary, Iceland, Ireland, Isle Of Man, Italy, Jersey, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Republic Of, Moldova, Republic of, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, San Marino, Serbia, Slovakia, Slovenia, Spain (50 of 52 provinces), Sweden, Switzerland
For Free under 30kg
2-3 Day shipping internationally
Two year guarantee
Please see manual here
Vacon 100 Series AC Inverter for 7.5kW (10HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 16A at high overload, or 11kW (15Hp) to 23A when Fan/Pump rated. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
Size MR5: 144mm Wide x 214mm Deep x 419mm High. IP54/NEMA Type 12
Weight: 10kg.
Overload: 150% x 60 seconds every 10 minutes, 200% x 2 seconds every 20 seconds
Speed Control Range: 0-320Hz.
Braking: Minimum 41 Ohm external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Graphical keypad.
2 x Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 2 x Relay Contact set, RS485.
Input Current: [as output current]A
Input Voltage: 380-500V -10%/+10% Three Phase at 50-60Hz (± 10%)
EMC Filters: IEC EN61800-3 Category C2 1st Environment (Industrial and Domestic).
Wall mount..
Rated 40°C Ambient.
Ventilation space in above: 120mm
Ventilation space below: 60mm
Ventilation space at sides: 20mm
Heat Loss at max output: [not specified]
Mounting via 4 x 7mm diameter holes at rear on 115mm x 406mm centres.
Manufacturer part number is VACON0100-3L-0023-5+IP54
Vacon 100 replaces NXS Series.
Specification & guidance notice: Technical information and FAQ content are provided in good faith based on manufacturer literature and industry experience. Descriptions of hydraulic types and application suitability represent general guidance only and do not constitute a guarantee of performance. Actual results will depend on system design, pipework losses, media characteristics, and installation conditions. Please consult the manufacturer & thier documentation and satisfy yourself that the equipment is suitable for your specific application prior to purchase.