

These figures provide simplified information for searching, filtering and initial comparison. They are not a complete specification. Exact details depend on the model and configuration.
Power rating: Usually the motor’s rated mechanical output (P2). Electrical input power (P1) is a different value. Check the product’s nameplate or manufacturer’s documentation to confirm which rating applies.
Outlet size: The nominal size class is expressed on a millimetre basis: for example, DN40 denotes a nominal 40 mm size. It does not specify the exact measured opening, connection type, thread, flange drilling or pressure rating.
Head and flow: Indicative figures describing the pump’s performance envelope, rather than a single operating duty point. Do not assume maximum flow is available at maximum head, or that every combination within the ranges is achievable. Minimum figures do not establish safe continuous operating limits. Consult the relevant performance curve.
Check the product description, nameplate and manufacturer’s documentation before selection or installation. Please contact us before purchasing if you need help confirming suitability or connection details.
| Shipping Weight | 0.5 kg |
| Package Dimensions | 20.0 × 20.0 × 10.0 cm |
Genuine Grundfos replacement wear ring 99208807, manufacturer dimension code D154/D168x15. Grundfos’s service catalogue identifies this part as the brass, press-fit wear ring in this size.
The manufacturer’s part record identifies NB and NK pump applications. Our research also found specific NBE, NBG, NBGE, NKE, TP, TPE, TPD and TPED product records listing this part. The individual pump references are included below, with additional material-selection notes where applicable.
| Manufacturer | Grundfos |
|---|---|
| Product type | Replacement pump wear ring |
| Grundfos part number | 99208807 |
| Material | Brass |
| Manufacturer version code | BS |
| Dimension code | D154/D168x15 |
| Nominal internal diameter | 154mm |
| Nominal external diameter | 168mm |
| Nominal axial width | 15mm |
| Fitting type | Press-fit spare wear ring |
| Catalogue position | Position 45 in the cited NB service catalogue; check the drawing for the exact pump |
| EAN | 5712608728426 |
| Quantity offered | 1 wear ring |
| Stock reference | #5056 |
The wear ring forms part of the controlled clearance around the impeller. It restricts internal recirculation between higher-pressure and lower-pressure areas of the pump. Excessive wear can increase this internal leakage and reduce hydraulic performance and efficiency.
Replacing a worn ring can form part of a pump repair, but the impeller, seating surfaces and associated components must also be inspected. The correct material and running clearance are essential.
Match 99208807 to the spare-parts record for your exact pump. Check the complete model designation, eight-digit product number, dimensions and required wear-ring material.
Grundfos lists brass, bronze and cast-iron wear rings with these same nominal dimensions. Some pump records include more than one material option. A matching size or a shared pump family therefore does not establish that brass is the correct material for every installation.
These are the nominal internal diameter, external diameter and axial width respectively. Grundfos expresses the size as D154/D168x15. These dimensions are not the pump’s pipe connection size or impeller diameter.
99208807 is the brass version. Grundfos places this exact part number in the brass column of its wear-ring selection table. Its product record gives the version code BS.
Grundfos lists 96797628 for bronze, 96939590 for cast iron and 99208807 for brass at D154/D168x15. These are distinct manufacturer selections. Do not substitute between them solely because the nominal dimensions match.
No. The wear ring controls internal hydraulic clearance around the impeller. A mechanical shaft seal seals around the rotating shaft where it passes through the pump. This listing supplies the wear ring only.
Excessive clearance can increase internal recirculation and contribute to reduced head, flow or efficiency. Those symptoms can also have other causes, so the pump should be inspected before assuming that the ring alone is responsible.
A new ring does not restore a damaged or undersized impeller surface. Inspect the mating impeller area, ring seating and associated shaft and bearing condition. The assembled clearance must meet the requirements for the exact pump.
Grundfos catalogues 99208807 as a press-fit spare wear ring. Follow the service procedure for the relevant pump version and check the condition of the seating before installation.
The nominal 154 × 168 × 15mm size does not specify machining tolerances, interference fit or permissible running clearance. Obtain those requirements from the service information for the exact pump; do not derive them from the nominal dimensions alone.
No. These ranges contain many hydraulic sizes and material configurations. Use the exact pump product number and its spare-parts listing. The manufacturer references below identify records that list 99208807.
Grundfos uses this part in the recommended spare-parts records for selected pumps in those families. Those references were checked individually. Their inclusion does not mean that every pump with the same connection size or family name uses this ring.
No. Those codes describe the mechanical shaft-seal configuration. The wear ring has its own size and material selection. Match part number 99208807 to the exact pump record.
This listing is for one ring. The number required depends on the pump construction and the scope of the repair. Check the exploded drawing and component quantities, particularly when servicing a twin-head pump or more than one wear-ring position.
Material suitability depends on the liquid, temperature and pump specification. Confirm that the brass option is appropriate for the application and the mating components. A dimensional match does not establish chemical compatibility.
No. It is a mechanical replacement component. The complete pump’s permitted operating limits remain those specified for its exact configuration. Motor voltage and power alone do not determine wear-ring compatibility.
The Pump Dealer supplies surplus pumps and replacement parts. This item is offered as new and unused surplus stock with a 2-year dealer guarantee. Please quote Grundfos 99208807 / stock reference #5056 when enquiring.
We searched Grundfos’s published product records and checked the recommended spare parts for the references below. All 340 pump product numbers listed here include wear ring 99208807 in their manufacturer spare-parts records.
Entries show the published pump designation followed by the eight-digit pump product number. Identical designations with different product numbers are retained as separate manufacturer records. One reference with an abbreviated manufacturer designation is shown separately.
This is the set of confirmed manufacturer references found during our research, not a claim to cover every historical, regional or specially configured pump. Match the exact product number, component position, quantity and material specification.
Grundfos publishes an abbreviated model name for the following reference. Its technical data identifies a BAQE shaft seal, and its recommended parts list includes 99208807. A complete type-code suffix has not been inferred.
These records also list the same-size bronze and cast-iron alternatives. Confirm that the brass ring is the required selection.
† Material options: These 26 manufacturer records also list the same-size bronze and/or cast-iron ring. Confirm that brass 99208807 is the correct selection for the pump and application.
Manufacturer reference checks were carried out on 20–21 October 2026. The eight-digit numbers at the ends of the entries identify complete pumps. The replacement wear ring offered here is 99208807, stock reference #5056.
Installation should follow the service instructions for the exact pump. Confirm the component position, required quantity, material and assembled clearances before returning the pump to service.
Specification & guidance notice: Technical information and FAQ content are provided in good faith based on manufacturer literature and industry experience. Descriptions of hydraulic types and application suitability represent general guidance only and do not constitute a guarantee of performance. Actual results will depend on system design, pipework losses, media characteristics, and installation conditions. Please consult the manufacturer & thier documentation and satisfy yourself that the equipment is suitable for your specific application prior to purchase.