Flygt MP 3085.172 HT 259 1.8kw 415v Submersible Macerator Pump #4827 USED
£1,249.00GBP
inc VAT
Technical overview
About these figures
These figures provide simplified information for searching, filtering and initial comparison. They are not a complete specification. Exact details depend on the model and configuration.
Power rating: Usually the motor’s rated mechanical output (P2). Electrical input power (P1) is a different value. Check the product’s nameplate or manufacturer’s documentation to confirm which rating applies.
Outlet size: The nominal size class is expressed on a millimetre basis: for example, DN40 denotes a nominal 40 mm size. It does not specify the exact measured opening, connection type, thread, flange drilling or pressure rating.
Head and flow: Indicative figures describing the pump’s performance envelope, rather than a single operating duty point. Do not assume maximum flow is available at maximum head, or that every combination within the ranges is achievable. Minimum figures do not establish safe continuous operating limits. Consult the relevant performance curve.
Check the product description, nameplate and manufacturer’s documentation before selection or installation. Please contact us before purchasing if you need help confirming suitability or connection details.
| Nominal voltage | 415v |
| Rated power | 1.8 kW |
| Nominal outlet size (mm) | DN 40 |
| Shipping Weight | 75.0 kg |
| Package Dimensions | 80.0 × 100.0 × 120.0 cm |
| Indicative minimum head | 5.0 m head (0.5 bar) |
| Indicative maximum head | 26.0 m head (2.6 bar) |
| Indicative minimum flow | 0.0 m³/h (0.0 L/s) |
| Indicative maximum flow | 3.9 L/s |
Flygt MP 3085.172 HT 259 – 1.8kW Submersible Macerator Pump #4827 USED
The Flygt MP 3085 is a heavy-duty submersible macerator pump designed for sewage and wastewater applications where solids reduction is required prior to pumping. The macerating hydraulic is intended to reduce fibrous material and suspended solids before discharge, making the pump suitable for demanding wastewater duties where blockage reduction is important.
Flygt is a premium pump manufacturer and part of the Xylem Group, widely recognised for producing high-quality wastewater and drainage pumps used globally.
This pump is supplied as a used pump and may show signs of previous installation, cosmetic wear, paint loss, corrosion staining or marks from service and storage.
- Flygt macerator / grinder hydraulic design
- Suitable for sewage and wastewater duties
- Permanent guide-rail installation with automatic discharge connection
- Designed for solids reduction prior to pumping through pipework
- 6 month guarantee included
Need help confirming suitability?
Call us on 01803 220416 for technical advice.
Delivery & Shipping
- Next working day dispatch available (order before 4pm)
- Same-day courier available – please call for a quote
- UK and international delivery available
- International shipping costs confirmed after checkout
Manufacturer specification:
Full technical details for the Flygt 3085 range can be found in the manufacturer documentation:
View official Flygt 3085 specification sheet
Technical note – voltage:
Voltage is shown as 415V in the listing for simplified search purposes.
This is a 3-phase 50Hz pump. The motor can be wired 400V Star or 230V Delta.
Electrical connection must always follow the motor nameplate and be carried out by a qualified electrician in accordance with manufacturer instructions.
Frequently Asked Questions
What does the model number mean?
- M – Flygt macerator / grinder hydraulic design intended for wastewater duties requiring solids reduction
- P – Permanent guide-rail installation with automatic connection to the discharge at the base of the wet well
- 3085 – Pump model series
- .172 – Model / variant designation
- HT – Motor / pressure class designation
- 259 – Impeller / cutter configuration code
What applications is this pump suitable for?
This model is intended for pumping sewage and wastewater containing suspended solids and fibrous material. Macerator pumps are commonly used in residential, commercial and agricultural wastewater systems where solids reduction is beneficial before pumping through smaller diameter or pressurised pipework. These systems are often used where gravity drainage is impractical due to terrain, distance or site constraints.
What is a macerator pump?
A macerator pump uses a cutting or grinding mechanism to reduce the size of solids and fibrous material before the liquid leaves the pump. This can help reduce the risk of blockage in certain wastewater systems, particularly where smaller diameter discharge pipework is used.
Why would I choose a macerator pump?
A macerator pump may be selected where wastewater contains wipes, fibres or suspended solids that could otherwise cause repeated blockages. They are commonly used in pressurised sewage transfer systems where solids reduction is preferred over large free-passage hydraulics.
What are the disadvantages of a macerator pump?
Macerator pumps generally use more complex hydraulics than standard wastewater pumps and may not be suitable for abrasive slurries or applications with large quantities of grit and sand. Correct application selection remains important and performance should always be confirmed against the manufacturer curve and pumped media.
How is a P installation pump fitted?
P-designation pumps are intended for fixed guide-rail installations with an automatic discharge connection at the base of the wet well. The pump slides down guide rails and seals automatically onto the discharge connection when lowered into position.
This pump is supplied with a Flygt guide-rail fitting. In some cases, Flygt macerator pumps may also fit certain Lowara guide-rail arrangements, but compatibility should be confirmed before purchase.
Please send photos of your existing guide rails, base connection and discharge arrangement and we can advise on compatibility before purchase.
Can this replace my existing Flygt pump?
In many cases, yes. If you provide your existing model number or duty point, we can confirm suitability before purchase.
Please send photos of your current guide rails, base connection and installation arrangement and we can advise on compatibility and the most practical installation method.
Do you offer technical support?
Yes — we provide free technical advice prior to purchase. Please call 01803 220416.
About Our Stock
We specialise in supplying surplus and used industrial pumps from leading manufacturers. All pumps are inspected prior to dispatch and supplied with guarantee.
Specification & guidance notice: Technical information and FAQ content are provided in good faith based on manufacturer literature and industry experience. Descriptions of hydraulic types and application suitability represent general guidance only and do not constitute a guarantee of performance. Actual results will depend on system design, pipework losses, media characteristics, and installation conditions. Please consult the manufacturer & thier documentation and satisfy yourself that the equipment is suitable for your specific application prior to purchase.