



| Shipping Weight | 1.0 kg |
This listing is for one individual Grundfos HQQV mechanical shaft seal, supplied from Grundfos bulk pack reference 96484072. It is associated with the Grundfos boxed shaft seal kit reference 96511845 for selected CR, CRI and CRN 10/15/20 vertical multistage pumps fitted with an HQQV shaft seal.
This item is listed under both 96511845 and 96484072 to help customers searching by either reference. It is supplied individually from bulk stock and may not be supplied in an individual Grundfos retail box.
Condition: supplied in as new surplus condition – the item has not been installed or used but may show minor cosmetic markings from storage and handling. Guarantee: supplied with a 2-year guarantee.
Need help confirming suitability?
Call us on 01803 220416 for technical advice.
The associated Grundfos boxed kit reference can be viewed on the official Grundfos product page:
View Grundfos Kit, Shaft seal HQQV – 96511845
Note: this listing is for an individual HQQV seal supplied from bulk pack reference 96484072. The related boxed service-kit reference is 96511845. Please use both numbers as cross-references rather than assuming every package configuration is identical.
General Grundfos CR / CRI / CRN technical documentation can be viewed here:
View Grundfos CR / CRI / CRN technical documentation
Grundfos mechanical shaft seal reference guide:
View Grundfos mechanical shaft seals for pumps guide
This is an individual Grundfos HQQV mechanical shaft seal. It is a service part only and does not include the pump, motor, chamber stack, pump head, base, coupling guards or pipework connections.
This seal is supplied from bulk stock under reference 96484072. The related boxed service-kit reference is 96511845. The references are closely associated for the HQQV seal family, but the packaging and kit configuration may differ.
In plain English, this is a balanced cartridge mechanical shaft seal with silicon carbide / silicon carbide seal faces and FKM elastomers.
The Type H design is a balanced cartridge O-ring seal unit. The cartridge construction makes replacement easier because the seal is supplied as an assembled unit, while the balanced design is suited to higher-pressure applications when correctly matched to the pump and duty.
Silicon carbide / silicon carbide is a hard-wearing seal face pairing used where good wear resistance is required. It can be suitable for demanding clean-water duties, provided the liquid gives adequate lubrication and is compatible with the seal materials.
The final V identifies the elastomer material as FKM, commonly known by the trade name Viton. This differs from an E suffix, which would indicate EPDM elastomers.
This seal is associated with selected Grundfos CR / CRI / CRN 10, 15 and 20 pump sizes. Compatibility depends on the exact pump version, shaft seal code, pressure version and service documentation.
Before ordering, please check the existing pump nameplate and fitted shaft seal code. If you are unsure, send us photos of the pump nameplate and existing seal details and we can help check suitability.
Do not assume interchangeability from pump size alone. Different shaft seal codes use different seal-face materials, elastomers and construction types. The replacement seal should normally match the original seal code unless the pump duty has been reviewed and an alternative seal has been correctly selected.
Suitability depends on the pump materials, liquid temperature, pressure, concentration and chemical compatibility. The HQQV seal uses silicon carbide / silicon carbide faces and FKM elastomers, so it should only be used where the pumped liquid is compatible with those materials and the pump’s wetted parts.
For chemically treated water, process liquids, glycol blends, oils, aggressive liquids or high-temperature duties, the seal selection should be checked against Grundfos guidance before installation.
It may be suitable for some glycol duties, but this should not be assumed without checking the exact glycol type, concentration, inhibitor package, temperature and pressure. Glycol can increase viscosity, affect seal-face lubrication and alter pump performance.
No. Mechanical shaft seals for liquids rely on a thin lubricating film between the seal faces. Running the pump dry, or without proper liquid at the seal faces, can quickly damage the seal.
Publicly indexed Grundfos Product Center pages and spare-parts listings show the 96511845 / 96484072 HQQV seal family against multiple CR, CRI, CRN, CRE, CRIE, CRNE and MTR models. Examples include:
This is a reference list of examples, not a guaranteed complete compatibility database. Always confirm the existing pump model, seal code, shaft/seal size, pressure version and Grundfos service parts list before ordering.
Stock code: #4935
We specialise in supplying new and unused surplus pump parts. This item is inspected prior to dispatch and supplied with a 2-year guarantee.
Specification & guidance notice: Technical information and FAQ content are provided in good faith based on manufacturer literature and industry experience. Descriptions of hydraulic types and application suitability represent general guidance only and do not constitute a guarantee of performance. Actual results will depend on system design, pipework losses, media characteristics, and installation conditions. Please consult the manufacturer & thier documentation and satisfy yourself that the equipment is suitable for your specific application prior to purchase.