Order From The Pump Dealer on: 01803 220416
Cart 0
Cart 0
Grundfos SP8A-10 NE Submersible Bore Hole Pump 4" 2.2kw 240v 316 Stainless

Grundfos SP8A-10 NE Submersible Bore Hole Pump 4" 2.2kw 240v 316 Stainless


2 year guarantee on all of our pumps
Please call on +44 (0)1803 220416
We also take card payment over the phone
We buy and sell new and unused pumps
GET IT FAST with our next day delivery service
Not sure? email me at info@thepumpdealer.co.uk
Internationally we ship to:
Aland Islands, Armenia, Austria, Belarus, Belgium, Bosnia And Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Faroe Islands, Finland, France, Georgia, Germany, Greece, Guernsey, Hungary, Iceland, Ireland, Isle Of Man, Italy, Jersey, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Republic Of, Moldova, Republic of, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, San Marino, Serbia, Slovakia, Slovenia, Spain (50 of 52 provinces), Sweden, Switzerland
Free under 30kg
£50 for 30kg - 70kg
Please contact for over 70kg
2-3 Day shipping internationally
Please note: this model is fitted with a 2.2kw single phase motor.
This is a special Model made entirely from 316 stainless steel. 
This pump requires either the control box: Grundfos SA-CSCR 2.2kw motor control box
or: Grundfos SA-spm 8 2.2kw
We can source these if you wish for around £250 inc VAT
Multi-stage submersible pump for raw water supply,groundwater lowering and pressure boosting. The pump is suitable for pumping clean, thin, non-agressive liquids without solid particles or fibres.

The pump is made entirely of Stainless steel DIN W.-Nr. DIN W.-Nr. 1.4401.


Pumped liquid:    Water
Maximum liquid temperature:    90 °C
Q_OpFluidTemp:    20 °C
Density:    998.2 kg/m³
Speed for pump data:    2900 rpm
Rated flow:    8 m³/h
Rated head:    43 m
Curve tolerance:    ISO9906:2012 3B
Pump:    Stainless steel
     DIN W.-Nr. 1.4401
     AISI 316
Impeller:    Stainless steel
     DIN W.-Nr. 1.4401
     AISI 316
Pump outlet:    Rp 2
Motor diameter:    4 inch
Electrical data:
Power (P2) required by pump:    1.45 kW
Start. method:    direct-on-line
Minimum efficiency index, MEI ≥:    0.14
Net weight:    8 kg
The motor is a 1-phase motor of the canned
type with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.


Max liquid t at 0.15 m/sec:    40 °C
Shaft seal for motor:    SIC/SIC
Approvals on nameplate:    CE,EAC
Motor version:    T40
Motor:    Stainless steel
     DIN W.-Nr. 1.4539
     AISI 904 L
Maximum ambient pressure:    60 bar
Motor diameter:    4 inch
Electrical data:
Motor type:    MS4000
Type of motor:    CSCR
C run:    60 µF
C start:    260 µF
Rated power - P2:    2.2 kW
Mains frequency:    50 Hz
Rated voltage:    1 x 220-230 V
Voltage tolerance:    +6/-10 %
Rated current:    14.6-14,0 A
Starting current:    540-600 %
Cos phi - power factor:    0.96-0,96
Rated speed:    2850-2870 rpm
Locked-rotor torque:    240-270 %
Moment of inertia:    0.0014 kg m²
Capacitor size - run:    60 µF/370 V
Capacitor size - start:    260 µF/330 V
Start. method:    direct-on-line
Enclosure class (IEC 34-5):    IP68
Insulation class (IEC 85):    F
Built-in temp. transmitter:    no
Net weight:    22 kg

Share this Product

More from this collection